Top irrigation mistakes to avoid making

Top irrigation mistakes to avoid making

When you have a great space of outdoor land that you are looking after or if you are planning a significant project in front of you, irrigation may well be a potential path that you are looking to go down. Of course, there are many advantages, including cost, convenience, and efficiency, but if you do not get it right, you may well be missing out on the full array of plus points. Bearing this in mind, here are just some of the irrigation mistakes that you need to sidestep.

Watering your plants too much

While you are setting up the irrigation to water your plants, you don’t want to risk overwatering them as this could have a detrimental effect on their health, and potentially even risk their lives. For this reason, it is worth looking into proper wholesale irrigation supplies to ensure that you have the full array of equipment that is going to prevent this from happening. Plenty of timing devices and other controls will prevent this from happening, which is why it is so important to have the proper planning in place.

Not matching the equipment to your plants watering needs

All plants have their own individual set of watering needs – and it is bound to be so important that you match what your plants require to what you set up for them. With this in mind, it is certainly going to be worth going back to the drawing board to ensure that you have thought through all the irrigation and matched it to what your plants need the most. While some projects will be relatively straightforward as every plant will need the same amount of watering, this is not true of every single irrigation project you embark upon.

Not looking at the capacity of the system

Different systems are going to be required for various watering needs. Therefore, it is certainly worth looking at your system and the capacity that it is involved. Once again, this will come in the planning stages, which will make a significant difference in ensuring that you have a system of the right capacity that works well.

Setting a water pressure too high or too low

The water pressure being too high or low can cause problems if you are not careful. If it is too high, this can easily mean that the plants can get overwatered, which is a problem already discussed. It can also cause some damage to the plants. On the other hand, if the plants are underwatered, this can result in the water not reaching the required area.

There you have just a few of the major mistakes that can come up when you are planning your irrigation that are more than worth avoiding. This way, you can ensure that the project you have in front of you is successful. Ultimately, the more thought that you have put into this and the better planning, the more likely it is to go well.